Steadying after landing
How long the horizontal force under each foot takes to settle after touch-down.
Left0.61 s
Right0.42 s
Same in all three clean jumps.
Private beta · free while it runs
Every force plate.
One clear answer.
Upload a recording from the force plates you already use. Movetrics Cloud tells you what changed, why, and how far to trust it, in plain words for coaches, physios and researchers.
- No new hardware
- Hosted in the EU
- Your data stays exportable
Who is looking?
Countermovement jump · Alex (sample athlete) · today
31.6 cm. Higher than their usual.
2.0 cm above their usual 29.6 cm, more than twice their normal spread.
Counted: attempts 1, 2 and 3, all clean.
Read by AIAlex jumped higher than usual and left the ground sooner, so the extra height came from a quicker push, not a deeper dip.
Jump heightusual 28.9 to 30.3 cm
31.6 cmTime to take-offusual 0.88 to 0.94 s
0.84 sLanding impactusual 2.7 to 3.0 × body weight
2.8 ×Bring the files you already have.CSV, TSV, Excel and C3D. One plate or two, vertical force or all six axes.
- CSV
- TSV
- Excel
- C3D
- AMTI
- Bertec
- Kistler
- Hawkin Dynamics
- PASCO
- Vernier
- Vicon
- Qualisys
- BTS
- Movetrics
Tested with exports from these systems’ software. A layout Movetrics hasn’t seen is asked about once, then remembered. Names belong to their owners. Download a sample file
How it works
From file to answer in one upload.
No scripts, no spreadsheets, nothing to install. Open a browser, drop in a recording and read the answer.
Drop in a file.
Any CSV, Excel or C3D export. When a layout is new, Movetrics asks once, such as which plate was under the left foot, and remembers it for every recording after.
Every attempt is checked.
Each jump gets its own checks: still before the dip, a clean take-off, a full landing. A doubtful attempt shows its reason on the curve, and one tap keeps it or leaves it out. Nothing is ever deleted.
Read the answer first.
The first line says what changed against this athlete’s own usual, and the next says how sure it is. The curve, each attempt and the method sit underneath for whoever wants them.
Beyond jump height
What the plates saw that the eye can’t.
Jump tests usually stop at the up-and-down force. When two plates also record horizontal force, every jump’s first page adds two things you can’t see from the side: how long each foot takes to steady after landing, and how hard each foot pushes horizontally on the way up.
Horizontal push
How hard each foot also pushed horizontally on the way up, averaged from the start of the push to take-off. Its size, not its direction.
Left64 N
Right41 N
From the counted jump.
These need two plates that record horizontal force. With vertical force alone, every jump, balance and strength result is still there.
Testing days
Testing day, sorted before anyone leaves.
Start a session, test the squad and watch the results arrive on one screen. Movetrics groups who needs a look, who still needs a clean jump and who hasn’t been tested yet, each with the reason in one sentence.
- Their own usual, not a league table.Each athlete is compared with their own last ten sessions. Only changes bigger than twice their normal spread are called out.
- Live while you test.The team screen updates as each recording lands, on any laptop or tablet.
- One tap to a team PDF.Hand it to the head coach or the squad the same day.
Testing day · U19 squad · countermovement jump11 of 13 tested
Two athletes need a look. One still needs a clean jump.
Needs a look · 2
Mia K.27.1 cm3.1 cm below their usual, more than twice their normal spread.
Jonas R.1 clean jumpTwo attempts left out, each with its reason on the curve. One more before Jonas leaves.
New best · 1
Lea S.35.2 cm1.4 cm above their previous best.
As usual · 8
Still to test: Tom B., Sara L.
Free recordings
One long recording, split into parts for you.
Record warm-up, jumps, squats and balance in one go. Movetrics finds where the movement changes, names each part and says when it isn’t sure. Tap Right or Change, then save the jumps as tests of their own.
- The original is never cut.Each saved part is a new recording over its own stretch of the same file.
- Found by rules, not guessed.Parts come from fixed rules on the force under each foot, so the same file always splits the same way.
Free recording · 1 min 35 sFound by Movetrics
8 parts: 3 jumps, squats, balance on each leg, stepping off.
2
Countermovement jump0:07 to 0:10
31.2 cmChecked3
Countermovement jump0:17 to 0:20
30.6 cmChecked5
Squats? Check0:33 to 0:48
6 repsRightChange6
Balance on the left leg0:52 to 1:07
15 sSave 2 parts as tests
What it measures
The tests you already run, each with its key result.
Every test opens on the number that matters for it, with the rest a tap away.
- Countermovement jumpJump height from take-off speed
- Squat jumpJump height
- Drop jumpReactive strength index
- Isometric pullPeak force and rate of force development
- BalanceSway speed and path
- Repeated hopsGround contact time
- WalkingSteps per minute
- RunningSteps per minute and contact time
- Any force recordingEvery axis to explore and export
- Free recordingSplit into parts, jumps saved as tests
Left and right for two-plate jumps, asked once per device and swapped in one tap.
AI, carefully
An AI read that explains, and never judges.
Under each countermovement jump, a few sentences say what stands out and point at the evidence. More tests follow. Every number in them comes from the measurement, never from the model, and it never gives a health verdict.
Read by AIAlex jumped higher than usual and left the ground sooner, so the extra height came from a quicker push, not a deeper dip. Landing looked as usual.
- Off until the owner switches it on.Each workspace owner decides. Notes stay out unless the owner ticks a second box.
- Names become codes.Athletes’ names are replaced with codes before anything is sent.
- Not used for training.Your recordings aren’t used to train AI models.
- Or bring your own AI.Connect Claude or ChatGPT to your workspace with read-only access, and switch it off at any time.
Your data
Your data. Your tools. No lock-in.
Everything you put in can come out again, in formats other tools read.
The original file, always.
Download exactly what you uploaded at any time, next to clean CSV and C3D versions.
Reports you design once.
PDF reports for one recording or the whole squad, from templates you shape.
Excel and scripts.
A read-only API with personal access keys. Pull recordings, raw samples and results into Excel, Python or R.
Claude and ChatGPT.
Ask questions about your own data in the AI app you already use, through a read-only connection.
Athletes see their own.
Invite an athlete or a parent to their own results and nothing else.
Share one result.
Send a link to a single recording without opening the rest of your workspace.
Trust
Built to be trusted with athletes’ data.
Hosted in the EU.
Data is stored in Ireland, the app runs in the Netherlands, and encrypted backups are made every night inside the EU.
Their own usual, never invented norms.
Every comparison is with the athlete’s own history, so a number never hides behind a population average.
It describes movement.
Movetrics is not a medical device. It doesn’t diagnose, predict injury or clear anyone to return to sport.
The method travels with the result.
Each number carries how it was measured and which engine version made it, so it can be checked and cited.
Will it work with my force plate?
Very likely. If your software exports CSV, TSV, Excel or C3D, Movetrics can read it: one plate or two, vertical force only or all six axes. When a file layout is new, it asks once and remembers. Tell us your system when you apply and we’ll check an export with you.
Do I need Movetrics hardware?
No. Movetrics Cloud works with the force plates you already have. If you use a Movetrics FDT, you can also record straight into Chrome.
What does it cost?
Nothing while the beta runs. Everything you upload stays yours and can be exported at any time.
Who can see my recordings?
Only the people you invite to your workspace, in the role you give them. Athletes or parents you invite see their own results and nothing else.
Is it a medical device?
No. Movetrics describes movement for coaching, rehabilitation teams, teaching and research. It doesn’t diagnose, predict injury or clear anyone to return to sport. Please only upload recordings you’re allowed to use.
How does the AI read work, and where does it run?
It’s off until a workspace owner switches it on. Reads use Anthropic’s Claude models, which process the request in the US. Athletes’ names are replaced with codes first, every number comes from Movetrics’ own measurement, and your recordings aren’t used to train AI models.
Can I leave and take everything with me?
Yes. Download your original files, exports and reports at any time, then delete your account in your account settings.
My system isn’t listed. Can I still apply?
Yes, please do. Tell us what you use and we’ll check an export with you before your workspace opens.
Private beta · small groups
Join the beta.
Movetrics Cloud is free while the beta runs. We open places in small groups and set up each workspace with you, starting with teams, clinics and labs that already own force plates.
- Apply in a minute.
Name, email and what you do. No file needed.
- We check your files fit.
Tell us your force plates or software, and we look at an export with you.
- Your invitation opens your workspace.
We open places in small groups and email you when yours is ready. Applying doesn’t create an account.